Regulatory And Safety Compliance - Kodak 6850 User Manual

Regulatory and Safety Compliance

Safety
Electromagnetic Compatibility (EMC)
November 2011
Complies with UL 60950-1:2006 Third Edition—CAN/CSA C22.2
No. 60950-1-03
EN 60950-1:2006+A11:2009
IEC 60950-1:2005 2nd Edition
Tested for Norwegian IT Power systems 240V phase to phase
NOTE: This equipment has been tested and found to comply with
the limits for a Class A digital device, pursuant to part 15
of the FCC rules. These limits are designed to provide
reasonable protection against interference when the
equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in
accordance with the instruction manual, may cause
interference to radio communications. Operation of this
equipment in a residential area is likely to cause
interference in which case the user will be required to
correct the interference at his or her own expense.
Requirements of the EMC directive 89/336/EEC were met
through compliance with the following:
• EN 55022: 94 (class A) with Amendments A1:95 and A2:97
• EN 55024: 98 ITE Immunity includes the following:
EN 61000-4-2 ESD
EN 61000-4-3 Radiated RF immunity
EN 61000-4-4 EFT
EN 61000-4-5 Surge
EN 61000-4-6 Conducted RF immunity
EN 61000-4-11 Voltage dips and interruptions
• EN 61000-3-2 Harmonics
• EN 61000-3-3 Flicker
CAUTION:
This is a class A product. In a domestic environment this
product may cause radio interference in which case the user
may be required to take adequate measures.
"Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to
operate the equipment."
This is a Class A product based on the standard of the Voluntary
3