Setting Up the Printer
Pinch roller
Red line
Paper feeding knob
Kodak
Photo Printer 6850
Power
Ready
Error
Making a Test Print
Kodak
Photo Printer 6850
Power
Ready
Error
2
1-10
7. Insert the paper under the pinch roller.
IMPORTANT:
8. Advance the paper to the red line by turning the paper feeding
knob.
9. Carefully close the paper door.
The operator panel displays the Paper Empty message.
10. Press Paper Advance to load the paper into the printer.
The printer advances the paper, then cuts and discharges about
Paper
24 in. (61 cm) of blank paper. This reduces the possibility of
Menu
Advance
fingerprints or other damage to the prints. It does not decrease the
750 4 x 6 in. (10 x 15 cm) print capacity of the paper roll (see
Enter
Paper
Rewind/Clear
page
A-2).
The operator panel displays the Ready message.
Make a test print to check that the printer is installed and set up
correctly.
1. Press Menu twice until Test Print Mode appears.
1
2. Press Enter to start printing the test print.
3. Press Clear to return to Ready after the test print is printed.
For more information on using the operator panel in Setup mode,
Paper
Menu
Advance
see
"Using Setup Mode to Review Printer Settings" on page
Enter
Paper
Rewind/Clear
3
Do not advance the paper past the red line or you may
cause the paper to jam.
4-2.
November 2011