Kodak 6850 User Manual page 21

Label
Green paper flange
Lugs
Black paper flange
Alignment
marks
Paper guide
November 2011
1. Remove the plastic cover from the new paper roll.
IMPORTANT:
2. Attach the paper flanges to each end of the paper roll.
Notches
a. Line up the lugs on the green paper flange with the notches
on the left side of the paper roll.
b. Place the green paper flange on the left side of the paper
roll.
c. Place the black paper flange on the right side of the paper
roll.
NOTE: Be sure to match up the lugs on the green paper flange
with the notches on the left side of the paper roll. If you do
not attach the paper flange properly, the paper roll will not
fit into the printer.
3. Open the paper door.
The operator panel displays the Cover Open message.
4. Set the paper roll into the printer according to the green and
black arrows on the label.
5. Remove the label from the paper roll.
6. Align the edge of the paper with the alignment marks on the
paper guide.
Do not remove the label from the paper roll until you
have successfully loaded the paper into the printer.
Setting Up the Printer
1-9