Loading The Ribbon - Kodak 6850 User Manual

Loading the Ribbon

Wrapper
November 2011
Have a KODAK Photo Print Kit 6800/4R or KODAK Photo Print
Kit 6800/6R available. These kits contain the correct size ribbon
for your printer. See Appendix A for details on the Photo Print Kits
(sold separately).
To load the ribbon into the printer:
1. Slide the cover release toward you, then open the upper cover
carefully.
Cover does not open beyond a 90° angle.
IMPORTANT:
CAUTION:
The thermal head becomes extremely hot during normal
operation. Do not touch it.
2. If you are replacing a ribbon, remove the used ribbon from the
printer.
90˚
NOTE: Images remain on the ribbon after printing. If you need to
maintain confidentiality, dispose of the used ribbon
appropriately.
3. Insert your fingers into the holes in the plastic on the end of
the ribbon. Remove the plastic cover from the ribbon.
Do not remove the wrapper from the ribbon at this time.
IMPORTANT:
Setting Up the Printer
1-5