Clean Up; Site Considerations - Grizzly G0444 Instruction Manual

Grizzly instruction manual 10" table saw g0444, g0444z
Hide thumbs Also See for G0444:
Table of Contents

Advertisement

Clean Up

The unpainted surfaces are coated with a waxy
oil to protect them from corrosion during ship-
ment. Remove this protective coating with a sol-
vent cleaner or citrus-based degreaser such as
Grizzly's G7895 Degreaser. To clean thoroughly,
some parts may need to be removed. For opti-
mum performance from your machine, make
sure you clean all moving parts or sliding
contact surfaces that are coated. Avoid chlo-
rine-based solvents as they may damage painted
surfaces should they come in contact.
Gasoline and petroleum
products have low flash
points and could explode
if used to clean machin-
ery. DO NOT use gaso-
line or petroleum prod-
ucts to clean the machin-
ery.
G0444/G0444Z 10" Table Saw
Smoking near solvents
could ignite an explosion
or fire and cause serious
injury. DO NOT smoke
while using solvents.
Lack of ventilation while
using solvents could
cause serious personal
health risks, fire, or
environmental hazards.
Always work in a well
ventilated area to pre-
vent the accumulation
of dangerous fumes.
Supply the work area
with a constant source
of fresh air.

Site Considerations

Floor Load
The Model G0444 weighs 257 lbs. and the Model
G0444Z weighs 283 lbs. Both models have a
base footprint of 21"W x 26"D. Most commercial
floors are suitable for your machine. Some resi-
dential floors may require additional reinforce-
ment to support both the machine and operator.
Working Clearances
Consider existing and anticipated needs, size of
material to be processed through each machine,
and space for auxiliary stands, work tables or
other machinery when establishing a location for
your saw. See Figure 11 for the maximum work-
ing clearances of the Model G0444/G0444Z.
79" W/Extended Rails
57" W/Standard Rails
50"
Figure 11. Maximum working clearance.
Unsupervised
and visitors inside your
shop could receive seri-
ous
Ensure child and visitor
safety
entrances to the shop
locked at all times. DO
NOT allow unsupervised
children or visitors in the
shop at any time.
children
personal
injury.
by
keeping
all
-17-

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

G0444z

Table of Contents