Table of Contents
Advertisement
DRIVE CHAIN INSPECTION
EC369002
DRIVE CHAIN INSPECTION
1. Remove:
• Master link clip
• Joint 1
• Drive chain 2
2. Clean:
• Drive chain
Place it in kerosene, and brush off as much
dirt as possible. Then remove the chain
from the kerosene and dry the chain.
3. Measure:
• Drive chain length (15 links) a
Out of specification → Replace.
4. Check:
• Drive chain stiffness a
Clean and oil the chain and hold as
illustrated.
Stiff → Replace drive chain.
5. Install:
• Drive chain 1
• Joint 2
• Master link clip 3
NOTICE
Be sure to install the master link clip to the
direction as shown.
a Turning direction
3-22
INSP
ADJ
Drive chain length (15 links):
<Limit>: 194.3 mm (7.65 in)
New
Hide quick links:
Advertisement
Table of Contents
