Table of Contents
Advertisement
HANDLEBAR
ASSEMBLY AND INSTALLATION
Throttle grip assembly
1. Install:
• Collar 1
• Handlebar grip (right) 2
Apply the adhesive on the tube guide 3.
TIP
Before applying the adhesive, wipe off grease
or oil on the tube guide surface a with a lacquer
thinner.
Handlebar
1. Install:
• Handlebar 1
• Handlebar holder 2
• Main switch 3
• Main switch holder 4
• Bolt (handlebar holder) 5
23 Nm (2.3 m · kg, 17 ft · lb)
TIP
• Align the punched mark a on the handlebar
with the upper surface of the handlebar holder
on the upper bracket.
• The handlebar holder should be installed with
the punched mark b forward.
• First tighten the bolts on the front side of the
handlebar holder, and then tighten the bolts
on the rear side.
5-46
CHAS
Hide quick links:
Advertisement
Table of Contents
