Yamaha TT-R125EY Service Manual page 158

ENGINE REMOVAL
TIP
• Apply the lithium soap base grease on the
thread of the engine mounting bolts (rear) 2.
• Tighten the engine mounting bolt (upper) 8,
and then tighten the bolts (engine bracket) 9.
Shift pedal link
1. Install:
• Shift pedal link 1
• Bolt (shift pedal link) 2
10 Nm (1.0 m · kg, 7.2 ft · lb)
TIP
Adjust the center a of the front end of the shift
pedal to match the highest point of the footrest.
Drive sprocket
1. Install:
• Drive sprocket 1
• Drive chain 2
TIP
Install the drive sprocket together with the drive
chain.
2. Install:
• Drive sprocket holder 1
• Bolt (drive sprocket)
6 Nm (0.6 m · kg, 4.3 ft · lb)
3. Install:
• Drive sprocket cover 1
• Bolt (drive sprocket cover) 2
12 Nm (1.2 m · kg, 8.7 ft · lb)
4-65
ENG