Yamaha TT-R125EY Service Manual page 191

FRONT BRAKE (TT-R125LE)
2. Install:
• Brake master cylinder cup (primary) 1
• Brake master cylinder cup (secondary) 2
On brake master cylinder piston 3.
TIP
Apply the brake fluid on the brake master cylinder
cup.
WARNING
After installing, cylinder cup should be in-
stalled as shown direction. Wrong installa-
tion cause improper brake performance.
3. Install:
• Spring 1
On brake master cylinder piston 2.
TIP
Install the spring at the smaller diameter side.
4. Install:
• Brake master cylinder kit 1
• Washer 2
• Circlip 3
• Brake master cylinder boot 4
On brake master cylinder 5
TIP
• Apply the brake fluid on the brake master
cylinder kit.
• When installing the circlip, use a long nose
circlip pliers.
5-19
CHAS