Yamaha TT-R125EY Service Manual page 221

3
2
1 3
HANDLEBAR
7. Install:
• Engine stop switch 1
• Clutch lever holder 2
• Screws 3
4 Nm (0.4 m · kg, 2.9 ft · lb)
TIP
• The engine stop switch and clutch lever
holder should be installed according to the
dimensions shown.
• Pass the engine stop switch lead in the middle
of the clutch lever holder.
8. Install:
• Clutch cable 1
• Clamp
TIP
Apply the lithium soap base grease on the clutch
cable end.
9. Adjust:
• Brake lever free play
Refer to "FRONT BRAKE ADJUSTMENT"
section in the CHAPTER 3.
• Clutch lever free play
Refer to "CLUTCH ADJUSTMENT"
section in the CHAPTER 3.
5-49
CHAS