Yamaha TT-R125EY Service Manual page 210

FRONT FORK
4. Install:
• Copper washer
• Bolt (damper rod)
23 Nm (2.3 m · kg, 17 ft · lb)
TIP
Use the damper rod holder 1 and the T-handle
2 to lock the damper rod.
Damper rod holder:
YM-1300/90890-01294
T-handle:
YM-01326/90890-01326.
5. Install:
• Oil seal 1
TIP
• Apply the fork oil on the inner tube.
• When installing the oil seal, use vinyl seat a
with fork oil applied to protect the oil seal lip.
• Install the oil seal with its manufacturer's
marks or number facing upside.
• Press the oil seal into the outer tube with fork
seal driver attachment (ø30) 2 and fork seal
driver weight 3.
Fork seal driver weight:
YM-33963/90890-01367
Fork seal driver attachment:
YM-33281/90890-01400
6. Install:
• Stopper ring 1
TIP
Fit the stopper ring correctly in the groove in the
outer tube.
5-38
CHAS
New
New