Yamaha TT-R125EY Service Manual page 146

2
a
KICK AXLE AND SHIFT SHAFT
REMOVAL POINTS
Kick axle
1. Remove:
TIP
Unhook the torsion spring 2 from the hole in
the crankcase.
Segment
1. Remove:
TIP
Loosen the screw using the T30 bit.
INSPECTION
1
Kick axle and ratchet wheel
1. Check:
2. Inspect:
Kickstarter segment gear and kick idle gear
3
1. Inspect:
1
Kick axle clip
1. Measure:
4-53
• Kick axle assembly 1
• Screw (segment)
• Segment 1
• Ratchet wheel smooth movement
Unsmooth movement → Replace.
• Kick axle 1
Wear/damage → Replace.
• Ratchet idle gear 1
• Kickstarter segment gear 2
• Kick idle gear 3
• Gear teeth a
Wear/damage → Replace.
• Kick axle clip friction force (torsion spring)
Out of specification → Replace.
Use a spring gauge 1.
Kick axle clip friction force:
0.65 ~ 1.35 kg (1.4 ~ 3.0 lb)
ENG