ENGINE OIL REPLACEMENT
5. Install:
• Dipstick
6. Start the engine and let it warm up for several
minutes.
7. Turn off the engine and inspect the oil level
once again.
TIP
Wait a few minutes until the oil settles before
inspecting the oil level.
ENGINE OIL REPLACEMENT
1. Start the engine and warm it up for several
minutes and wait for five minute.
2. Place the machine on a level place and hold
it on upright position by placing the suitable
stand under the engine.
3. Place a suitable container under the engine.
4. Remove:
• Oil drain bolt 1
• Dipstick 2
5. Install:
• Copper washer
• Oil drain bolt 1
6. Fill:
• Engine oil
7. Check:
• Oil leakage
8. Check:
• Engine oil level
9. Install:
• Dipstick 2
3-10
INSP
Drain the engine oil.
New
20 Nm (2.0 m · kg, 14 ft · lb)
Oil capacity:
Periodic oil change:
1.0 L (0.88 Imp qt, 1.06 US qt)
ADJ