Checking Of Connection - Yamaha TT-R125EY Service Manual

CHECKING OF CONNECTION

EC1C0000
CHECKING OF CONNECTION
Dealing with stains, rust, moisture, etc. on the
connector.
1. Disconnect:
2 Dry each terminal with an air bower.
3. Connect and disconnect the connector two
4. Pull the lead to check that it will not come off.
5. If the terminal comes off, bend up the pin 1
6. Connect:
TIP
The two connectors "click" together.
7. Check for continuity with a tester.
TIP
• If there in no continuity, clean the terminals.
• Be sure to perform the steps 1 to 7 listed
• For a field remedy, use a contact revitalizer
• Use the tester on the connector as shown.
1-4
• Connector
or three times.
and reinsert the terminal into the connector.
• Connector
above when checking the wireharness.
available on the market.
GEN
INFO