Treadmill Installation Instructions (Cont'd)
5
NO
NOTE: Before tightening, make sure base of neck is flush.
6
7
All Treadmills
Continued
YES
- Holding the bracket base against the product neck,
put the crossbow back plate in position and insert
the two socket head cap screws by hand.
- Tighten the 2 screws into the cross bow using the
9/16" Allen wrench.
- Slide the top monitor support bracket (Gooseneck)
and lower it over neck.
- Secure the gooseneck by inserting the 4 flat head
screws and tighten securely.
- Use any 4 holes to adjust TV height. See A/V install
section for more info.
16 16