Treadmill Power Cord Tie Wrap - Star Trac E-TRe Troubleshooting Manual

Star Trac recommends securing the power cord on the E Series and S Series treadmills with a tie wrap (zip tie). This will
prevent intermittent power issues caused when the power cord become loose in the connector.
Step 1
Make sure the power cord connector it securely plugged in to the treadmill (Fig. 1). Raise the treadmill incline to
15% (or high enough to give you room to work underneath). Once elevated, turn the power switch Off, so the unit
does not automatically come back down while you are working underneath.
Step 2
You may need to open the motor shroud. You will need to loop a tie wrap (zip tie) up and back down through two
holes to hold the power cord connector into place (Fig. 2).
Step 3
Make sure the power cord is routed out the front of the treadmill (Fig. 3) and will be out of the way of the unit's
normal operation. Make sure the power cord has enough slack so that the treadmill can incline and decline
without tension on the power cord. Cut the excess tie wrap (Fig. 4)
Test unit for proper function.
STAR TRAC FITNESS

Treadmill Power Cord Tie Wrap

E Series & S Series Treadmills
Fig. 1
Fig. 3
Customer Services Bulletin
1 of 1
Fig. 2
Fig. 4
637-1308 Rev: A