Table of Contents
Advertisement
3.5.2 Important Note for Installation
Before installing, insert a micro SD card into the main body and replace the 3 desiccant bags inside
the top housing. The desiccant bag loses its effectiveness after you open the camera. To keep the
camera's interior dry, it is highly recommended to replace the desiccant bags every time when you
open the camera.
3.5.2.1
Replacing the Desiccant Bags
1.
On the To Housing, slightly press the black plastic socket backward and lift up the base
board.
2.
Remove the desiccant bags from the top housing.
3.
Stick the supplied 3 new desiccant bags inside the top housing.
Note: Ensure Not to place the desiccant bags under the position of the fan.
8
EPN Plus Series
Advertisement
Table of Contents
