EverFocus EPN Plus Series User Manual page 71

EPN Plus Series
Auto Resume: Activate this setting to return the camera to the previous mode, if no action has occurred
for a selectable period of time. Available options include After 1 M (minute), After 5 M, After 10 M, After
30 M, After 60 M, and OFF (deactivate this function). After the selected period, the camera will revert to
the mode you set in the "Resume To" field below.
Resume To: Select the mode that the camera will return to, if you have configured the Auto Resume field
above. Available options are POS.1 (H) (the Preset position "1"), TOUR1, PAT.1 (Pattern "1"), AUTOPAN and
PREV.MODE (the previous mode the camera was in).
Power Up Func.: Select the mode that the system will revert to when a power failure occurs. Available
options of this field are OFF, POS.1 (H) (the Preset position "1"), TOUR1, PAT.1 (Pattern "1"), AUTOPAN and
PREV.MODE.
Auto Flip: Select ON to tilt the camera by 180° using the direction controls on the PTZ Control window.
Owing to the mechanical design, the camera will tilt 90° first, and then the camera will flip by 180 degrees,
after that, go down to 180° (see image below). Select OFF to disable the Auto Flip function and the camera
will be tilted by 90°.
°
°
0
180
°
180
64