Table of Contents
Advertisement
5.
To change the IP address, double-click the IP Address of the camera. Type a new IP address and
then click Set IP Address to save the settings.
You can also change the other settings by double-clicking the values. After configuring the values,
click Save Configuration.
Note: Most networks support DHCP protocol, but if you are unsure of your network protocol,
please consult your IP administrator for network configuration details.
6.
To access the camera, highlight the camera and click Connect to Selected IP. The Internet
Explorer window pops up.
7.
Type the user ID and password to log in. The Live View window of the camera appears.
Note: You might be required to download ActiveX, which is required to view the camera feed.
If asked, click "Yes".
18
EPN Plus Series
Advertisement
Table of Contents
