EverFocus EPN Plus Series User Manual page 33

To move the camera in a preconfigured sequence movement, click the Pattern
button, select a pattern number and then click the Go button. Click the Live View
Window once can stop running the pattern. A preset Pattern is where you get up to
90 seconds to move the camera (via the PTZ buttons) to your choice of sequential
positions at a preset speed. After which you can save that sequence of movements.
Up to 4 Patterns can be configured.
Note: To use this function, you have to set up a pattern on the PTZ Settings page. See
7.5 PTZ.
To move the camera in a preconfigured sequence consists of a selection of Patterns
and Preset Positions, click the Tour button, select a tour number and then click the Go
button.
Note: To use this function, you have to set up at least one tour on the PTZ Settings
page. See 7.5 PTZ.
Numeric
Click to enter the number for the selected action.
Buttons
Black Area
Displays the selected number.
Go Click this button to activate the selected action number.
Clear Click this button to clear the entered number.
26
EPN Plus Series