EverFocus EPN Plus Series User Manual page 42

【Date/Time Format Used in Text】Click the dropdown menu to select date/time format from the
listed options. Click on the desired hour format. Click Apply to apply the setting changes or Reset to
reset without saving the change.
【Recording / Snapshot Export Settings】
Enable Event Recording to PC: Check this box to record the event recordings to the user's PC.
Export Folder: Select the Export folder for the action above by clicking on the browse
and then select the desired folder.
File size: The user can limit the size of each recorded file here (in minutes). When a single recording
file exceeds the time you set, the system will create a new file to save that data to.
Overwrite: Select "ON" for overwriting recording/snapshot file when the disk storage capacity is full.
The user can set the storage capacity limitation in the in-sentence field in the gray box below the
Overwrite setting: "If the remaining hard disk capacity is less than ____ MB (50~2000), system will
stop recording or start overwriting. "
Click Apply to apply the setting changes or Reset to reset without saving the changes.
【Language Settings】To add a new language not listed in the current Language list, click the Browse
button to locate the new language file (.evb) on your computer and then click the Upload button.
Updated language files might be available on the manufacturer's website. Contact your vendor if
required.
Click Apply to apply any changes or Reset to reset without saving the changes.
Note: Uploading a new language file will cause the system to reboot automatically. Please create a
new network connection to the IP camera when the reboot is complete.
35
EPN Plus Series
button,