EverFocus EPN Plus Series User Manual page 69

Tour: You can combine up to 16 preconfigured camera positions and patterns into one long sequence.
Up to 16 Tour sequences can be set up.
To set up a Tour Sequence:
1. Click the Program button next to Set Tour, the following Tour panel appears.
2. Select a number from the Tour No drop-down list.
3. To set up the first position for Tour No.1, select OFF, Preset or Pattern in the Mode field.
4. Enter a Preset No. or Pattern No. in the Value field.
5. Enter a dwell time that the Tour will pause at a Preset position or after a Pattern sequence.
6. Enter a speed at which the camera will move to the Preset position or first point of the Pattern
sequence.
7. Follow Step 3 to 6 to configure up to 16 positions for Tour No.1.
8. To configure another Tour sequences, select a number from the Tour No drop-down list and follow
Step Step 3 to 6 to configure up to 16 positions for the selected Tour number.
9. Click Apply to apply the settings.
To activate the Tour function, on the Live View window, click the Open button in the PTZ Control field
to display the PTZ Control window. Click the Tour button, click on the numeric buttons to select a Tour
number and then click the Go button. The camera will move to the positions in a long sequence you
have configured.
62
EPN Plus Series