System - Avaya 3711 User Manual

3.10 System

Registration Code
The phone can be manually registered on up to 10 different DECT systems. Before you can make a call via the DECT
system, the phone has to be registered to the system. A system ID and registration code are necessary for the
registration process. When the phone is not subscribed to the system, "Please, subscribe" is displayed.
This is for information only. Please contact your system administrator to register the phone.
All settings in this chapter are started by pressing the softkeys:
System
Menu OK
Registering the Telephone to the DECT System
Subscription
OK Options
System name OK Local phone number OK
The following entries must be made when logging on:
Enter PARK
- a system ID should only be entered if you are at a location where two DECT systems overlap. If
·
only one DECT system is available, then just press OK.
Enter Auth.Code
·
system supplies this code.
Enter System Name
·
the idle display. For information concerning the entry of characters, see
Enter Local Number:
·
system administrator for the phone number).
Selecting the DECT System
Subscription
OK
If the phone has been registered to several DECT systems, then you can select which one the phone is to be used with.
Select the system via the arrow keys before confirming "Select". By choosing Options
search is disabled. The selected system is displayed.
Automatic Search System
Subscription
OK
If you have registered your phone with several DECT systems and this function is active ("
automatically select one of the systems. Your phone is automatically "logged-in" to another of the registered DECT
systems, as soon as you move out of the effective range of the current system. This function is disabled if a specific
system is selected by the select option.
Deleting a System
Subscription
OK
Use the arrow key to select the system, before you choose Options
information from your phone for the selected DECT system, not at the DECT system.
Note: After execution of this function, the phone cannot be used on that DECT system. To use it again, you must go
·
through the registration procedure for the DECT system and the phone.
3711 Phone
IP Office
New / OK IPEI: 12......... OK PARK OK
- this code is used to get access to register the phone (authentication code). The DECT
- enter the name of the DECT system which you are registering. This will be shown on
- the phone number, assigned to your DECT phone, can be entered here (ask your
select a System Options
Auto. Search Option Select
select a System Options
Entering Characters/Names
Select
OK
OK
Delete Sure?
OK OK
Delete
. This function removes subscription
Menus: Caller Filter
PIN Authentication code OK
.
29
Select
, the function automatic
"), then the phone will
15-601084 Issue 05b (03 October 2008)
Page 41