Advertisement
Avaya G860 Media Gateway Setup
Laptop computer with EMS client installed for staging.
●
Filled-out planning form with IP addresses. A blank planning form is available on
●
support.avaya.com
addresses are required for several items, including certain TN circuit packs, such as
C-LANs, MedPros, and VAL; network servers, such as DNS, NTP, and NMS; and certain
components on the G860 Media Gateway. The following table provides guidance on which
G860 items need IP addresses:
Laptop access for staging
If you are staging the Avaya G860 Media Gateway, make sure you have the following
equipment and applications available. For detailed information on staging, refer to the internal
Job Aid: Requirements for Staging G860 High Density Trunk Gateway R1 G860 HDTG.
Laptop computer running Windows XP, service pack 2
●
Internet Explorer, version 6.0 or higher.
●
EMS client software
●
Console cable for EMS server (Cable and serial adapter is shipped with EMS Sunfire
●
Server.)
Console cable for the system controller (Cable and serial adapter is shipped with G860
●
Media Gateway)
4
Avaya G860 Media Gateway Setup
within the product documentation for G860 Media Gateway. IP
G860 Slots
Module
10
TP 6310-R
9
TP 6310
8
TP 6310 (optional)
7
TP 6310 (optional)
6
N/A
5
N/A
4
Eth Switch (ES)
3
Eth Switch (ES)
2
Sys Controller (SC)
1
Sys Controller (SC)
GLOBAL
Logical Sys Controller (SC)
IP Address/Mask
03-601863, Issue 1, November 2007
http:/
Advertisement
