Advertisement
Avaya G860 Media Gateway Setup
3. Select the MG Status tab to display a replica of the front panel.
Board slots are numbered from 1 to 10 from bottom to top, as displayed on the left side of
the front panel. The TP6310 boards are in slots 9 and 10.
4. Right-click on the active TP6310 card shown in black and select
5. Click Yes in the confirmation window.
The TP6310 board resets and returns to service after several minutes. The Alarm Browser pane
at the bottom of the window indicates the status of the board.
Avaya Communication Manager configuration
The following sections describe how to configure call routing in Avaya Communication Manager
for the Avaya G860 Media Gateway. Other information about SIP administration can be found in
the online help that is part of the SIP Administration Web interface.
The first part covers configuring the SIP trunks that communicate with the Avaya G860 Media
Gateway. The second part covers call routing:
how inbound calls from the Avaya G860 Media Gateway are directly mapped to 5-digit
●
extensions in Avaya Communication Manager.
how Automatic Route Selection (ARS) is configured for outbound calls through the Avaya
●
G860 Media Gateway.
22
Avaya G860 Media Gateway Setup
Maintenance
03-601863, Issue 1, November 2007
>
Unlock
Advertisement
