Avaya G860 Setup page 11

Avaya G860 Media Gateway configuration
3. Under the Parameters pane on the left, select General Settings.
4. Set the IP Address 1 field to the IP address for this TPM.
5. Set the None Mode Clk Source field to pstn.
6. Set the SSL/TLS Negotiation field to TLSv1Only.
7. Use the default settings for the other fields.
8. Click Apply and Close.
Configuring DS3 trunk on the TPM
The TP6310 board must be locked before starting these steps. on page 9
See Locking the TPM .
1. In the right pane under the MGs List, select the entry corresponding to the Avaya G860
Media Gateway to be configured.
2. 2. Select the MG Status tab to display a replica of the front panel.
11
Avaya G860 Media Gateway Setup 03-601863, Issue 1, November 2007