Advertisement
Verifying system capacities
You must verify that an adequate number of SIP trunk members are administered for the
system.
1. Log into a SAT session as craft or dadmin.
2. Type display system-parameters customer-options and press Enter.
3. Go to the IP Port Capacities page.
4. In the Maximum Administered SIP Trunks field, verify that you have an adequate
number of trunks.
5. In the Maximum TN2602 Boards with 320 VoIP Channels field, verify that you have an
adequate number of channels.
6. In the ARS? field, verify that it is set to y.
Assigning IP codec sets
1. Type change ip-codec-set n and press Enter.
2. In the Audio Codec field, type in the codec set you want to use.
For example, type G.711MU for G.711 u-law.
Assigning IP network regions
!
Important:
The authoritative domain must be the same as that used on the signaling group
Important:
screen. Domain is case sensitive.
1. Type change ip-network-region and press Enter.
2. In the Authoritative Domain field, type in the desired domain.
For example, type companyx.com.
3. In the Name field, type in a unique name.
4. In the Codec Set field, type in the codec set you want to use for this network region.
5. Set the Intra- and Inter-region IP-IP Direct Audio fields to yes.
Avaya G860 Media Gateway Setup
Avaya Communication Manager configuration
03-601863, Issue 1, November 2007
23
Advertisement
