IP Address: Set IP address for the hosts
•
Port Range: Set port numbers for the virtual server.
•
Protocol: Set protocol for the virtual server.
•
Comment: Type comment for the virtual server settings.
•
Click Apply to confirm your configuration. And the current virtual servers will be shown in the current
virtual servers in system area. Click Reset to uncheck boxes before all rules.
DMZ
Select Firewall > DMZ, the DMZ settings are shown in the following figure:
If you select Enable, set the DMZ IP address, and then click Apply to confirm your configuration.
System Security
Select Firewall > System Security, the system security setting is shown in the following figure:
29