Zte MF10 User Manual page 27

Default Policy: Set how to handle the packet if none of the rules matches.
•
MAC address: Set the MAC address that will be filtered.
•
Dest IP Address: Set the destination IP address that will be filtered.
•
Source IP Address: Set the source IP address that will be filtered.
•
Protocol: Set which protocol will be used for filtering.
•
Dest Port Range: Set the destination port numbers that will be filtered.
•
Source Port Range: Set the source port numbers that will be filtered.
•
Action: Set how to handle the packet if it matches with the rule.
•
Comment: type comment for the filter settings.
•
Click Apply to confirm your configuration, or click Reset to clear your configuration.
The following figure shows you the current MAC/IP/Port filtering rules in system.
Click Delete to delete the selected rules, or click Reset to uncheck boxes before all rules.
URL Filter
Select Firewall > URL Filter, the URL Filter is shown in the following figure:
27