Getting started ............. 8 sion of ZTE Corporation. Appearance ................8 LED Indicator ................ 8 The manual is published by ZTE Corporation. We reserve the right Interface Description ............10 to make modifications on print errors or update specifications with- Installation ................. 10 out prior notice.
Login ..................16 Accessing the Internet .............. 18 Thank you for choosing ZTE MF29 Router (hereinafter referred to Accessing the Internet by LTE Gateway ......18 as “device” or “router”). To get the most from your router and to keep Operation Mode ................
• Do not take out your (U)SIM card unnecessarily. The (U)SIM ZTE shall not be liable for any loss of profits or indirect, special, card may be easily lost or it can be damaged by static electricity. incidental or consequential damages resulting from or arising out...
Getting started Indicator State Description Blue Registered to 3G network The router operates on the LTE/HSUPA/HSDPA/WCDMA network 2 Network Green Registered to LTE network and supports voice and data service. mode Registered to EDGE network Appearance indication Not Registered WAN connection established (PDP acti- vated) 3 WAN connection...
Interface Description 1. PHONE: Standard RJ11 connector for telephone. 2. PHONE: Standard RJ11 connector for telephone. Note: 3. WAN/LAN: Ethernet connections to the Internet or computer. Please power off the router and remove the external power adapter 4. LAN1~LAN3: Ethernet connections to computer. before removing or inserting the (U)SIM card.
Voice Connecting to the Internet Connect the WAN/LAN interface to the Internet with an Ethernet Making a Call cable (RJ45). You can make a call through VoIP. The VoIP number is provided by Connecting with External Power your service operator. Please contact your service operator to get Connect the external power adaptor to a standard power outlet.
Internet Access The router does not require any drivers, and it supports all operat- ing systems with Ethernet LAN capability, such as Windows 2000, XP, Vista, MAC OS X and Linux. The router supports two computers surfing on internet using Ethernet cable at the same time. Note: All the parameter settings in this chapter are just for your ref- erence.
Security. 5. Wait a moment, the connection between your device and the client will be established successfully. Accessing the WebGUI Configuration Page 1. Make sure the connection between your device and the client is correct. 2. Launch the Internet browser and enter http://192.168.0.1 in the address bar.
The whole interface is divided into three parts. Related functions can computer. be executed by operation in the related areas. • Cable Broadband: Connect to the Internet by WAN. • Index area: Show the configuration list for your device. • 4G Gateway: Connect to the Internet by (U)SIM.
Click Apply to confirm your configuration. handshake. APN Setting • User Name: User name is used to obtain authentication from the Select Settings > 4G Settings > APN Setting, the APN parameters ISP when the connection is established are shown in the following figure: •...
Inbox Select SMS over IP > User1/ User2 > Inbox to access the following figure: There are two connection modes: • Auto Connect: The router will automatically connect to WAN when it is powered on. • Manual Connect: Connect to the Internet or disconnect from the All the received messages saved in your device will be displayed Internet manually.
SIP Realm: This is a string value provided by the ITSP, such as • STUN Mode: Enable or disable the use of STUN server to AVSTW, or may be a domain name like www.zte.com.cn, defined discover NAT mapping. by customer.
• Authorized Password: This is a password for authentication • Call Forwarding: Select call forwarding way. with a registrar. • Call Waiting: Enable or disable call waiting function. • VoIP Register Status: Show the register status of SIP server. • Do Not Disturb: Enable or disable do not disturb function.
Page 15
• WDS Mode: WDS enable router to communicate with other APs, WDS connection is two-way communication, APs should know each other’s wireless MAC address. And make sure that all APs share the same SSID and channel. WDS configuration is shown below: Step Description 1.
Page 16
5. Set peer AP's wire- Only Repeater Mode and Bridge Mode less MAC address on need this. router The HT physical Mode parameters are shown below: • Operating Mode: In Mixed Mode, packets are transmitted with a preamble compatible with the legacy 802.11a/g, the rest of the packet has a new format.
Page 17
• Shot Slot: To indicate that 802.11g is using a shot time slot • OPEN: You can authenticate successfully with a SSID, whether because there is no legacy station(802.11b) present. it is valid or empty. • Tx Burst: Tx burst allows router to deliver better throughput in •...
• Key Renewal Interval: Define how long the key should be To set WPS, select WPS mode, the two modes are described below: renew. • PIN: There are two ways to use PIN mode, one is set PIN code You can set Wireless MAC Filtering: on the client's wireless adapter(you can find the PIN code in AP •...
Page 19
To add a new rule: 1. Select Enable in the Basic Settings area. 2. Click Apply. 3. Input the detail information in the Mac/IP/Port Filtering area. 4. Click Apply in the Mac/IP/Port Filtering area. URL Filtering You can setup content filter to restrict the improper content access. Select Firewall >...
If you select Enable, the Virtual Server Settings will appear: System Security You can configure system firewall to protect AP or router from being attacking. Select Firewall > System Security, the system security setting is shown in the following figure: •...
Page 21
You can change the administrator’s password. Click Apply to con- Notes: firm your configuration. Consecutive inputting wrong PIN code for three times can cause Restore locking of UIM card. To unlock, you need PUK code. Select Settings > Advanced > Restore, click Restore to set all the PIN code and PUK code may be offered together with the UIM card.
Upgrade Firmware U-Disk Master Select Settings > Advanced > Upgrade Firmware to upgrade the 1. Start up your device. software version of the router. 2. Launch the client device connected to your device. 3. Connect the storage devices (i.e.USB disk) to the USB port of the device.
The cable or phone set might be faulty. You can get Help by: I hear a rapid en- • Sending E-mail to mobile@zte.com.cn gaged tone as soon Put the phone on hook and try again. • Visiting http://www.airtel.in/4G as I lift the phone off •...
Technical Parameters Glossary Network & Frequency Band • AC: Alternating Current LTE TDD: • APN: Access Point Name • DC: Direct Current 2600 MHz (Band 38) • DHCP: Dynamic Host Control Protocol 2300 MHz (Band 40) • DNS: Domain Name System (or Service or Server) UMTS: 2100 MHz (Band 1) •...