Zte MF10 User Manual page 23

Channel BandWidth: Set the HT physical channel bandwidth.
•
Guard Interval: Set the HT physical guard interval.
•
MCS: Set fix MCS rate for HT rate.
•
Reverse Direction Grant(RDG):Enable RDG or not.
•
Extension Channel: Set extension channel. The extension channel is also able to send and receive data.
•
Aggregation MSDU(A-MSDU) : Mark to enable Hyper Throughput TX Aggregate MAC Service Data
•
Unit, and clear by selecting Disable.
Auto Block ACK: Block ACK(Acknowledge Number) or not during data transferring.
•
Decline BA Request: Reject peer BA-Request or not.
•
Click Apply to confirm your configuration, or click Cancel to cancel your configuration.
Advanced
Select Wi-Fi Settings > Advanced, the advanced wireless network parameters and Wi-Fi multimedia
parameters are shown in the following figure:
Beacon Interval: The router broadcasts beacon message to announce that it has buffered frames to
•
deliver. The default value is 100 (ms).
Data Beacon Rate(DTIM) :Set the wireless network data beacon rate.
•
Fragment Threshold: Set the wireless network fragment threshold.
•
23