Zte MF10 User Manual page 25

WEPAUTO: Select WEP security automatically.
•
WPA-PSK: WPA Pre-Shared Key, Enter the Pre-Shared key as a plain text (ASCII) pass-phrase of at
•
least 8 characters.
WPA2-PSK:It is the securer version of WPA with implementation of the 802.11i standard.
•
WPA-PSK/WPA2-PSK: Apply both the WPS-PSK and WPA2-PSK scheme.
•
If the Authentication type is Shared or WEPAUTO, or you select Open and set the Encrypt Type as
WEP, the WEP parameters are shown in the following figure.
Default Key: Set the WEP Key as the default.
•
WEP Keys: At most four keys can be set in the blank. Choose the primary key index. The primary key is
•
the only key in use at a given time. Whatever keys you enter for an access point, you must also enter the
same key for the client adapter in the same order. In other words, WEP key 1 on the AP must match
WEP key 1 on the client adapter, WEP key 2 on the AP must match WEP key 2 on the client adapter,
etc. A WEP is either 10 or 26 hexadecimal digits (0~9,a~f and A~F), either 5 or 13 ASCII characters
based on whether you select 64 bits or 128 bits in the Encryption Strength drop-down list.
If the Authentication type is WPA-PSK , WPA2-PSK or WPA-PSK/WPA2-PSK , the WPA parameters
are shown in the following figure.
WPA Algorithm: TKIP, AES or AUTO.
•
Pass Phrase: You can input hexadecimal digits up to 64 characters or input ASCII characters choose a
•
length between 8 characters and 63 characters.
Key Renewal Interval: Define how long the key should be renewed.
•
Click Apply to confirm your configuration, or click Cancel to cancel your configuration.
25