Zte MF10 User Manual page 24

RTS Threshold: Set the wireless network RTS threshold.
•
TX Power: Set the wireless network TX power.
•
Short Preamble: Disable short preamble or not.
•
Short Slot: Enable short slot or not.
•
Tx Burst: Enable Tx burst or not.
•
Pkt_Aggregate: Enable packet aggregation or not.
•
IEEE 802.11H Support: Support IEEE 802.11H or not.
•
Country Code: Select the desired country.
•
WMM Capable: Enable Wi-Fi Multimedia(WMM) or not.
•
APSD Capable: Enable APSD or not.
•
Click Apply to confirm your configuration, or click Cancel to cancel your configuration.
Security
Select Wi-Fi Settings > Security, the Security parameters and Wireless MAC Filtering parameters are
shown in the following figure:
Security Mode:
•
WPA-PSK/WPA2-PSK.
Encrypt Type: Use WEP Encryption or not.
•
Add MAC Filtering Rule: Choose the type of MAC filtering. When you select disable, the MAC
•
addresses are not used to control network access.
The security modes are described below:
Open: You can authenticate successfully with a SSID, whether it is valid or empty.
•
Shared: The WLAN clients who have the same WEP key with wireless gateway can pass the
•
authentication and access the wireless network.
24
Including OPEN, SHARED, WEPAUTO, WPA-PSK, WPA2-PSK or