Wi-Fi Settings - Zte MF10 User Manual

IP Address: LAN IP address of the router.
•
Subnet Mask: Subnet mask of the router.
•
MAC Address: MAC address of the LAN interface.
•
DHCP Type: The router is set up as a DHCP server, which provides IP address in IP pool range for all
•
the computer connected.
DHCP Start IP: Allocate start IP address for IP pool.
•
DHCP End IP: Allocate end IP address for IP pool.
•
DHCP Lease Time: Define how long the leased IP address will be expired.
•
UPNP: Enable UPNP or not.
•
Click Apply to confirm your configuration, or click Cancel to cancel your configuration.
DHCP Clients
Select Router > DHCP Clients, All of the DHCP clients information will be shown in the following
figure:
Click Refresh to update the information.

Wi-Fi Settings

Station list
Select Wi-Fi Settings > Station List, All of the wireless network stations information will be shown in
the following figure:
Basic
Select Wi-Fi Settings > Basic, the wireless network parameters and WDS mode are shown in the
following figure:
21