Firewall - Zte MF10 User Manual

WPS
This function is to simplify the security setup of Wi-Fi networks. This Router supports the configuration
setup using PIN configuration method or PBC configuration method.
Select Wi-Fi Settings > WPS, the WPS configuration is shown in the following figure:
Select Enable, and then click Apply to configure the details.
The following figure shows you the current configuration of WPS. Click Reset OOB on this page
to restore the default value. Click Generate on this page to generate a new AP PIN code.

Firewall

MAC/IP/Port Filtering
Select Firewall > Mac/Ip/Port Filtering, the Mac/IP/Port Filtering is shown in the following figure:
If you select Enable, the filter settings will appear:
26