Appendix D: Connecting Ptz Cameras - Lorex LH400 LINK SERIES User Manual

APPENDIX D: CONNECTING PTZ CAMERAS

You can connect RS-422/485 PTZ cameras (not included) to the PTZ Control Block on the rear
panel of the system.
PTZ CAMERA
(not included)
Figure 42.0 Connecting a PTZ camera (not included)
To install a PTZ Camera:
1. Connect the Transmit Cable to the RS-422/485 TX (+) port of the PTZ block on the rear panel.
2. Connect the Receive Cable to the RS-422/485 TX (-) port of the PTZ block on the rear panel.
3. Connect the video cable to a BNC port (usually channel 1).
4. Open the Main Menu and select
5. Under PTZ MODEL, select the model of your PTZ camera.
6. Under PTZ ID, select the PTZ ID
connected the PTZ camera).
NOTE: The PTZ camera settings depend on the type of PTZ camera. Please refer to the specific camera
manual for your brand and model of PTZ camera.
7. Press the ENTER button to save your settings.
*8-channel model shown.
.
CAMERA
(PTZ ID should match the camera channel to which you have
Appendix D: Connecting PTZ Cameras
DVR*
73