Camera Indicators; Display Views; Changing Channels; Onscreen Display - Lorex LH400 LINK SERIES User Manual

Live Mode

Camera Indicators

Use the camera indicator for each connected DVR to change channels in full-screen and observe
camera status.
Figure 25.1 DVR Indicator
• Blue: Video input is connected without recording
• Dark Blue: Video loss
• Red: Actively recording

Display Views

• Click the display mode buttons to the right of the
main display screen to view channels in full-screen,
quad, and various split-screen configurations
• If you have multiple systems connected, click
buttons 25, 36, 49, and 64 to view videos in large
split-screen modes
• Double-click any channel to view it in single channel
full-screen; double-click again to return to the
previous split-screen mode
• While in split-screen, you can right-click any
channel and select FULL SCREEN to view that
channel in single channel full-screen mode

Changing Channels

If viewing a system in full-screen, you can change
channels while in full-screen.
• Select your system from the DVR list at the bottom
of the main screen
• Double-click any of the displayed channels to view
that channel in full-screen—active channel will be
highlighted in red
• Click and drag a channel to another desired
location

Onscreen Display

• Click
display (REC, FPS, CH number)
44
to show/hide the onscreen
Figure 25.2 Display modes
Figure 25.3 Click and drag channels in Lorex Client 8.0