Ddns; Easy Connect; Misc - Lorex LH400 LINK SERIES User Manual

Using the Main Menu

DDNS

Configure Lorex DDNS settings.
You must register for the FREE Lorex
NOTE:
DDNS service at
http://www.lorexddns.net
prior to configuring DDNS settings.
Figure 18.2 DDNS menu
To configure DDNS settings:
1. Under USE, select
2. Under DOMAIN NAME, enter only the first
portion of your DDNS domain from the
confirmation email. For example, if your
domain name is tomsmith.lorexddns.net,
you only need to enter
field.
3. Under USER ID, enter your
.
user name
4. Under PASSWORD, enter your
.
password
Obtain your Lorex DDNS user name
NOTE:
and password from the confirmation email.
5. Under DDNS TEST, select
successful, you see "GOOD." If
unsuccessful, you will see "ERROR." If you
receive an error, please check your
network connections and carefully
re-enter your Lorex DDNS information.
6. Press to save your settings. Press
ENTER
to close remaining windows.
CANCEL/ESC
You can also enter DDNS information
NOTE:
remotely using Lorex Client 8.0. For details,
see "Appendix C: Setting Up DDNS Service"
on page 71.
28
or .
Lorex OFF
tomsmith
in the text
Lorex DDNS
Lorex DDNS
. If
START

EASY CONNECT

Configure Easy Connect Settings.
To enable Easy Connect:
1. Select ON (default) and press ENTER to
save your settings.
Figure 18.3 DDNS menu
To disable Easy Connect:
1. Select OFF and press ENTER to save your
settings.
For detailed instructions on setting up Easy
connect, see "Appendix M: Lorex Easy Connect
Internet Remote Viewing" on page 90.

MISC

Configure additional network settings.
Figure 18.4 MISC menu
To configure bandwidth settings:
1. Under BANDWIDTH, select
, ,
KBPS 256 KBPS 512 KBPS
, , or
4 MBPS 8 MBPS
By default, the system is set to
NOTE:
UNLIMITED. Change the bandwidth setting
to maximize your network performance.
2. Press to save your settings. Press
ENTER
to close remaining windows
CANCEL/ESC
,
64 KBPS 128
, ,
1 MBPS 2 MBPS
.
UNLIMITED
,