Time; Password; Control - Lorex LH400 LINK SERIES User Manual

Remote Setup

TIME

Figure 39.1 System options—Time
To set the time:
1. Stop all recording on the DVR. To stop
recording remotely, select the Control tab
from the System menu and click RECORD
STOP.
2. Select the TIME tab and configure the
following:
• DATE: Enter a date
• TIME: Enter a time
3. Click APPLY and then OK to save your
settings and close the window.

PASSWORD

• The password tab allows you to remotely
change the password of the different user
accounts on the system.
• The administrator must enable a user
account on the system in order to change
the password remotely.
• If you do not enable user accounts on your
system, there will be no entry fields in the
password tab.
• Once you enable a user account on the
system, the password tab populates with
a blank field that allow you to remotely
change the password for the user.
For details on how to enable user accounts on
the system, see "ACCOUNT" on page 29.
66

CONTROL

Figure 39.2 System options—Control
The Control tab allows you to start and stop the
primary functions of the system.
To control the DVR:
1. Select the CONTROL tab.
2. Click STOP RECORD to stop continuous
recording on the system. Click START
RECORD to resume continuous recording.
3. Click SCHEDULE ON to enable/disable
scheduled recording. The button will be
highlighted in light blue when scheduled
recording is enabled.
NOTE: A recording schedule must already be
entered on the system prior to enabling/
disabling schedule recording remotely. For
details on setting a recording schedule, see
"SCHEDULE" on page 25.
4. Click ALARM 1 to enable/disable the
alarm.
5. Click APPLY and then OK to save your
settings and close the window.