Lorex Client 8.0 Setup - Lorex LH400 LINK SERIES User Manual

Using Lorex Client 8.0

Lorex Client 8.0 Setup

To use setup:
1. From the Lorex Client 8.0 main screen, click
The Setup menu opens.
2. Under the GENERAL 1 tab, configure the following:
• OSD SETUP: Choose the elements to appear on the
onscreen display. Select/deselect TIME, CAMERA
NUMBER, FRAME RATE, SET NAME, and CAMERA
NAME
• OVERLAY (default): It is highly recommended to
keep overlay enabled for a faster video
transmission. Only disable the overlay if any invalid
driver is distorting the screen image. If the problem
persists, reduce hardware acceleration
NOTE: If you change the Overlay option, you will be
prompted to restart Lorex Client 8.0.
• VIDEO MODE: Select NTSC or PAL depending on
your region (NTSC for USA, Canada; PAL for
Europe)
• DOWNLOAD: Choose a save location for recorded
video and screen captures
• VERSION: Displays the current software version of
Lorex Client 8.0
3. Under the GENERAL 2 tab, configure the following:
• ETC: Select AUTO FULL SCREEN... to display the
triggered alarm channel in full-screen; select USE
AUDIO to turn on audio transmission from an audio
capable camera (not included); select LOG DISLAY
LIMIT to cap the Lorex Client 8.0 log file to 1000
events
4. Under the PASSWORD tab, enter a new password
FOR LOREX CLIENT 8.0 ONLY (no password by
default). Click APPLY, not OK, to save the
password.
NOTE: If changing your password at a later date, make
sure to enter your old password along with your new
password.
5. Under the SOUND tab, configure the following:
• PLAY SOUND: Select CONNECT, DISCONNECT, for
Lorex Client 8.0 to make a sound when it connects/
disconnects to a DVR; select ALARM, MOTION, and
VIDEO LOSS for Lorex Client 8.0 to make a sound
when any of these events are triggered on the
system.
6. Click APPLY and then click OK to close the Setup menu.
42
.
SETUP
Figure 24.0 Lorex Client 8 setup—General 1
Figure 24.1 Lorex Client 8 setup—General 2
Figure 24.2 Lorex Client 8 setup—General 2
Figure 24.3 Lorex Client 8 setup—General 2