USING THE SYSTEM
To power the system ON/OFF:
1. Connect the power cable to the port on the rear panel.
2. Press the
POWER
You need to press the Power button for initial startup
NOTE:
viewing screen on subsequent resets.
You will need to input your system password (by default,
NOTE:
Use the mouse or remote control to enter the password. You can also use the front panel to
enter in the 0's by pressing
Quick Setup
By default, the system has Quick Setup enabled. Quick Setup lets you quickly adjust the time and
record mode on the system. The system menu will appear as the Quick Setup menu with only Time
and Record options available.
Figure 2.0 Quick Setup menu
Using Quick Setup
Use Quick Setup to set the time and configure basic recording settings.
To set the time:
1. Under the Time tab, select
2. Select
and enter the time (hh/mm/ss).
TIME
If using the mouse, you will enter the date and time with the Virtual Keyboard.
NOTE:
3. Press the
ENTER
To configure recording settings:
1. Stop ALL RECORDING on the system. Enter your system password (by default, 000000).
2. Under the RECORD tab, select RECORD MODE and select one of the following: CIF 4CH,
FIELD 4CH, FRAME 4CH, CIF 8CH, FIELD 8CH, FRAME 8CH, or CIF + FRAME.
8
button on the front panel or remote control.
+
and
simultaneously.
and press the
DATE
button to save your changes.
Reminder!
only
button. Enter the month, day, and year.
ENTER
Resolutions:
CIF - 360 x 240
Field - 360 x 480
Frame - 720 x 480
. The system will load the live
) to power off the system.
000000