JVC VN-V686U Instructions Manual page 97

A
On Screen Display
Settings
Camera ID
PositionTitle
Motion Detection
Tracking Frame
Tracking Status
Time
Format
B
Stream Settings
Stream
HTTP Port
Frame Rate
For setting display items on the viewer screen.
For the JPEG Viewer, characters are displayed as overlay on the video
image.
Select On to display [Camera ID]. (Up to 16 alphanumeric characters will
be displayed. )
[Camera ID] can be specified on the Camera page of VN-V686U. (A
Page 38)
Select On to display the title of the position that is being displayed.
Selecting On displays the area in which motion is detected in red.
Select On to display blue frame around the tracking target of
Intelligent Tracking on the screen. (A Page 111)
Select On to display the Intelligent Tracking status as Standby , Locked
or Losing on the screen. (A Page 111)
Select On to display the time.
This indicates the time that is stored in the JPEG data.
Select the format for displaying time.
YYYY, MM, and DD denote year, month and day respectively, while HH, MM,
and SS denote hour, minute and second respectively. mm is equivalent to 1/
100 seconds.
For specifying settings for receiving JPEG stream.
For selecting the protocol when the viewer acquires data from VN-V686U.
When HTTP is selected, lost packets are recovered via resending. VN-
V686U may be monitored using multiple viewers when Multicast is
selected.
:
Memo
● When playing back via multicast, start multicast sending on the
Streaming page of the VN-V686U unit.
[Streaming Page] (A Page 70)
Note:
● When Built-in Viewer is launched with Multicast specified, a Windows
firewall warning may appear. In this case, select unblock and proceed.
● If block is selected, the Windows firewall will block the multicast stream
and playback of multicast by the viewer will fail.
You can change the HTTP port number.
The default port number setting is 80 .
Specify the same value as the parameter that is set on the Protocol page of
VN-V686U. (A Page 69)
For selecting the acquisition frame rate of the viewer.
Selecting a large frame rate will increase the processing load of the
computer on which the viewer is running.
Note:
● Set to a rate such that the CPU burden of the computer does not exceed
80 %. When the CPU is overloaded, the computer may not function
properly.