JVC VN-V686U Instructions Manual page 94

Settings and operation of Built-in Viewer
Preparation (continued)
Installing Built-in Viewer
1
Enter the URL of Built-in Viewer in the address field of Internet Explorer
For example, if the IP address of VN-V686U is 192.168.0.2, enter as follows:
JPEG Viewer
http://192.168.0.2/cgi-bin/v686viewing.cgi?v686monitor_j.html
MPEG4 Viewer
http://192.168.0.2/cgi-bin/v686viewing.cgi?v686monitor_m.html
Enter the URL in Built-in Viewer of this camera.
(Refer to the above for the default URL setting.)
http://192.168.0.2/cgi-bin/v686viewing.cgi?v686monitor_j.html
2
Enter the user name and password
3
The viewer is installed and launched
A
Enter the user name.
This is set to admin by default.
B
Enter the password.
This is set to vn-v686 by default.
Click [OK].
C
Click [Go]