JVC VN-V686U Instructions Manual page 102

Settings and operation of Built-in Viewer
MPEG4 Viewer (continued)
MPEG4 Viewer Configuration
(continued)
A
Title Bar Display
Settings
Camera ID
PositionTitle
Tracking Status
Time
Format
B
Stream Settings
Stream
HTTP Port
Multicast IP
Address
For setting display items on the viewer screen.
For the MPEG4 Viewer, characters are displayed in the title bar of the
window.
Select On to display [Camera ID]. (Up to 16 alphanumeric characters will
be displayed. )
[Camera ID] can be specified on the [Camera] page of VN-V686U. (A
Page 38)
Select On to display the title of the position that is being displayed.
Select On to display the Intelligent Tracking status as Standby , Locked
or Losing on the title bar. (A Page 111)
Select On to display the time.
Select the format for displaying time.
YYYY, MM, and DD denote year, month and day respectively, while HH, MM,
and SS denote hour, minute and second respectively. mm is equivalent to 1/
100 seconds.
For specifying settings for receiving MPEG4 stream.
For selecting the protocol when the viewer acquires data from VN-V686U.
When HTTP is selected, lost packets are recovered via resending. VN-
V686U may be monitored using multiple viewers when Multicast is
selected.
:
Memo
● When playing back via multicast, start multicast sending on the
Streaming page of the VN-V686U unit.
[Streaming Page] (A Page 70)
Note:
● When Built-in Viewer is launched with Multicast specified, a Windows
firewall warning may appear. In this case, select unblock and proceed.
● If block is selected, the Windows firewall will block the multicast stream
and playback of multicast by the viewer will fail.
You can change the HTTP port number.
The default port number setting is 80.
Specify the same value as the parameter that is set on the Protocol page of
VN-V686U. (A Page 69)
You can change the multicast IP address.
The default address is 225.0.2.1.