JVC VN-V686U Instructions Manual page 73

Destination
Address
A
Access
Restrictions
B
IP Address
Note:
● Note that when allow is selected and all IP address fields are left blank, JPEG/MPEG4 acquisition by all
IP addresses will be denied. Restrictions are not imposed on access to the Web Settings page.
Additionally, VN-V686U will also deny access when instructions for transmission to the specified IP
address are sent via API.
:
Memo
● To specify a specific IP address range, enter a combination of the IP address and subnet mask in the [IP
Address] item B field.
● Define the subnet mask using a length between 8 to 30 bits.
For example, a range between 192.168.0.0 to 192.168.0.255 is denoted as 192.168.0.0/24 ([IP
Address]/[bit length of subnet mask]).
Restrictions may be imposed on clients accessing VN-V686U using the IP
address.
When deny is selected, acquisition of JPEG/MPEG4 via the IP address
specified for the [IP Address] item B will be denied. Restrictions are not
imposed on access to the Web Settings page.
When allow is selected, acquisition of JPEG/MPEG4 via the IP address
specified for the [IP Address] item B will be permitted. Restrictions are not
imposed on access to the Web Settings page.
When a multicast address is specified and deny is selected, VN-V686U will
deny transmission to this multicast address.
When a multicast address is specified and allow is selected, VN-V686U will
only accept transmission to this multicast address and deny transmission to
multicast addresses that are not stated in the [IP Address] item B field.