Registering Preset Positions - JVC VN-V686U Instructions Manual

Settings and operation of Built-in Viewer
PTZ Controller Operation
(continued)

Registering Preset Positions

The [PTZ Controller] window appears upon clicking the [PTZ] button.
Click the [Position Memory] tab of the [PTZ Controller] screen and register the preset positions in the
[Position Memory] screen.
Note:
● When [Auto Flip] is set to Digital Flip , preset positions cannot be registered when the tilt angle is more
than 90 degrees. [Auto Flip] (A Page 59)
:
Memo
● When setting preset positions and [Pan Limit] is On , pan operation is unavailable in the prohibited
areas. [Pan Limit] (A Page 57)
● As moving preset positions has priority over pan limit, set the preset positions when [Pan Limit] is Off .
After that, when [Pan Limit] is set to On , the camera will pan regardless of the prohibited areas. [Pan
Limit] (A Page 57)
● Items stored in the preset position are pan, tilt, zoom, focus, position title, white balance, iris and backlight
compensation.