JVC VN-V686U Instructions Manual page 108

Settings and operation of Built-in Viewer
PTZ Controller Operation
(continued)
Operation (continued)
D
Zoom
E
Pan/Tilt manual
operation button,
[Home] button
F
Speed
Pan/Tilt
Focus/Zoom
G
Variable Speed
This item sets the zoom operation of the lens when clicking the button.
+ : Zoom is set to TELE and the object becomes bigger.
- : Zoom is set to WIDE and the object becomes smaller.
:
Memo
● When electronic zoom is set to other than Off, the camera will stop
temporarily when switching from optical zoom to electronic zoom and
vice versa, even though the [+] or [-] button of [Zoom] is pressed
continuously. To continue zooming, press the [+] or [-] button of [Zoom]
again.
Click the arrow button to move the camera in that direction. Release the
button to stop the movement.
Click the [Home] button to move to the home position.
:
Memo
Operation when [Home] button is clicked
● When in the Auto Tracking mode, Auto Tracking continues after returning
to the home position.
● If the [Mode] item under [Auto Return] is set to Auto Tracking , Auto
Tracking starts upon returning to the home position. (A Page 54)
This item sets the operation speed.
This item sets the operation speed of the Pan/Tilt manual operation button
E.
Increase the number to increase the operation speed.
[Setting range:1 to 8]
This item sets the operation speed of the [Zoom] operation button D and the
[Focus] operation button L.
Increase the number to increase the operation speed.
[Setting range:1 to 4]
This function adjusts the Pan/Tilt operation speed by the zoom ratio.
Select the checkbox to slow down at Tele and to move quickly at Wide.
Deselect the checkbox to always move the camera at the speed configured
under the [Speed] item F of Pan/Tilt regardless of the zoom ratio.