JVC VN-V686U Instructions Manual page 110

Settings and operation of Built-in Viewer
PTZ Controller Operation
(continued)
Operation (continued)
K
White Balance (continued)
R Gain
B GAIN
One Push AWC
L
Focus
One Push AF
Adjusts the R (red) hue during AWC.
+ : Increases the redness or red level.
- : Decreases the redness or red level.
[Setting values:0 to 255]
:
Memo
● Click the button once to change to the next value. To change the value
continuously, click repeatedly. The value will not change if the button remains
pressed down.
Adjusts the B (blue) hue during AWC.
+ : Increases the blueness or blue level.
- : Decreases the blueness or blue level.
[Setting values:0 to 255]
:
Memo
● Click the button once to change to the next value. To change the value
continuously, click repeatedly. The value will not change if the button remains
pressed down.
Executes AWC (automatic white balance control).
Execute by placing a white object around the center of the screen in a location with a
lighting condition that is similar to the object to be shot.
:
Memo
● Pressing the [One Push AWC] button replaces the [R Gain] and [B GAIN] values
with the values of the AWC execution results.
● Even when [White Balance] is set to ATW-Narrow , ATW-Wide , pressing the
[One Push AWC] button switches the mode automatically to AWC.
This item adjusts the focus.
Easy AF : Auto Focus (AF) will activate automatically when the pan, tilt or
zoom function is operated manually. This is convenient as you
need not reset the focus everytime you move the camera when
there are many manual operations.
Manual : Click the [+], [-] buttons to adjust manually. The focus will
change while the button is being pressed. It will stop when the
button is released.
:
Memo
● The Easy AF function may not focus properly for some objects. In this case,
set the focus manually.
Click the [One Push AF] button to focus automatically in 1 second.