Optimizing The Image - BenQ GP10 User Manual

Optimizing the image

Selecting a picture mode
The projector is preset with several predefined picture
modes so that you can choose one to suit your
operating environment and input signal picture type.
To select an operation mode that suits your need, you
can follow one of the following steps.
• Make sure the input source is on computer, DVD
player, composite video, component and HDMI
mode and the projection screen is displayed.
• Press Mode on the remote control projector repeatedly until your desired mode is
selected.
• You may press
Settings and press OK to enter. Select Picture Mode and press
desired mode.
The picture modes are listed below.
1. Bright mode: Maximizes the brightness of the projected image. This mode is
suitable for environments where extra-high brightness is required, such as using the
projector in well lit rooms.
2. Standard mode (Default): Is designed for presentations. The brightness is
emphasized in this mode.
3. Cinema mode: Is appropriate for playing colorful movies, video clips from digital
cameras or DVs through the PC input for best viewing in a blackened (little light)
environment.
4. Game mode: Is appropriate for playing games.
5. User mode: Recalls the settings customized based on the current available picture
modes. See
Setting the User mode
There is one user-definable modes if the current available picture modes are not suitable
for your need. You can use one of the picture modes (except the User) as a starting point
and customize the settings.
1. Press
2. Press
3. Select Picture Mode and press
4. Press
This function is only available when User mode is selected in the Picture Mode sub-menu item.
5. Press
6. Press
See "Fine-tuning the image clarity"
7. When all settings have been done, highlight Save Settings and press OK to store
the settings.
8. The confirmation message 'Setting Saved' displays.
Operation
32
to open the pop-up menu. Press
"Setting the User mode" on page 32
to open the pop-up menu.
to select Picture Mode Settings and press OK to enter.
to highlight Reference Mode.
/ to select a picture mode that is closest to your need.
to select a sub-menu item to be changed and adjust the value with
to select Picture Mode
for details.
/ to select User.
below for details.
/ to select a
/ .