Entering The Password Recall Procedure; Changing The Password; Disabling The Password Function - BenQ GP10 User Manual

Entering the password recall procedure

1. Press and hold
seconds. The projector will display a coded
number on the screen.
2. Write down the number and turn off your
projector.
3. Seek help from the local BenQ service center to
decode the number. You may be required to
provide proof of purchase documentation to
verify that you are an authorized user of the projector.

Changing the password

1. Go to the Settings > Advanced > Security Settings > Change password
menu.
2. Press OK. The message 'Input Current Password' displays.
3. Enter the old password.
• If the password is correct, another message 'Input New Password' displays.
• If the password is incorrect, the password error message displays lasting for three
seconds, and the message 'Input Current Password' displays for your retry.
You can press
4. Enter a new password.
The digits being input will display as asterisks on-screen. Write your selected password down
here in this manual in advance or right after the password is entered so that it is available to you
should you ever forget it.
Password: __ __ __ __ __ __
Keep this manual in a safe place.
5. Confirm the new password by re-entering the
new password.
6. You have successfully assigned a new password
to the projector. Remember to enter the new
password next time the projector is started.
7. To leave the OSD menu, press

Disabling the password function

To disable password protection, go back to the Settings > Advanced > Security
Settings > Power on Lock menu. Select Off and press OK. The message'Input
Password'displays. Enter the current password.
• If the password is correct, the OSD menu returns to the Security Settings
page with 'Off' shown in the row of Power on Lock. You will not have to enter
the password next time you turn on the projector.
• If the password is incorrect, the password error message displays lasting for three
seconds, and the message'Input Password'displays for your retry. You can press
Operation
30
on the remote control for 3
to cancel the change or try another password.
to cancel the change or try another password.
or .